CDC1-S Series Basic Type PLC - PLC

Technical Characteristics

♦ 32-bit high performance CPU

Compiled execution mode; scan cycle is 10 times faster than that of the analytic model.

♦ Fast instruction execution

The execution time of single-step run instruction is up to 0.05uS.

♦ High-performance high-speed pulse input/output
Support 2-way or 4-way high-speed pulse output, up to 200KHz Support two-way single-phase or one-way AB phase high-speed pulse counting, up to 200KHz.

♦ Powerful expansion

Supports up to 8 expansion modules, with multiple expansion modules available.

♦ Large storage capacity

With more than 20,000 lines of user program storage area, larger program capacity 2KByte power-off storage area, for safer data storage.

♦ Multi-layer encryption protection

Including the upload password, download password, monitoring password, sub-program password and other protection, protect the legitimate rights and interests of users.

♦ Convenient program download monitoring

With USB interface, support USB download program and monitor program running status.

♦ Easy to install software and easy to program

Easy to install the programming software with rich and convenient programming interface tools.

♦ Communication interfaces

Two communication ports, with one RS232 and one RS485.

♦ Easy to network

ModbusRTU master-slave mode supporting RS485 can realize networking, and can connect up to 127 communication devices.

。Electrostatic grade: 4, ±8000V

。With an external real-time clock chip, the clock time is more accurate.

。Support analogue simulation operation and online monitoring mode.

。The programming software is simple and easy to understand, supporting more than 160 commands.

。With European and Japanese programming styles, support ladder diagram programming and command input programming.

。With clear program structure, there are main program, subprogram, and interrupt program, and the program is divided into multiple grids.

。The application command in the ladder diagram is in the form of a command block, which appears in the tree menu for selection by user.

。Support for initializing register values and status.

。Support C language programming; with built-in rich library functions, easy to program, more efficient; support Modbus master-slave mode and free port communication for more flexible use.

。Support external interrupt and timer interrupt functions, independent of the main program scan cycle Make the given signal response more timely.

。Support the component use table view function, and the allocation management of the registers is more convenient.

。Support user variable table, with centralized customization of variables, for more efficient programming.

I.Basic PLC host

Model	CDC1-S16T-A	CDC1-S32T-A	CDC1-S64T-A	CDC1-S16R-A	CDC1-S32R-A	CDC1-S64R-A
Power supply
Power (W)	2.6	3	3.6	3.2	5.2	6.8
Power supply	AC100V～240V
Input parameters
Digital input	8	16	32	8	16	32
SINK/SRCE wiring	Transformed by internal common point terminal S/S and external common line wiring
Input signal voltage	DC24V±20%
High-speed counting	2 ways, up to 200KHz respectively		4 ways, up to 200KHz respectively	2 ways, up to 200KHz respectively
AB phase counting	One way, up to 200KHz respectively		2 ways, up to 200KHz respectively	One way, up to 200KHz respectively
Output parameters
Digital output	8	16	32	8	16	32
Output type	Transistor			Relay
Output voltage	6～30VDC			<250VAC, 30VDC
Max. inductive load	12W			80VA
Max. resistance load	0.5A/high speed, up to 200KHz (Y0/Y1) respectively; 0.2A/low speed 10KHz (Y2 ~ Y7), not exceed 3A at common point		0.5A/high speed, up to 200KHz (Y0～Y3) respectively; 0.2A/low speed 10KHz (Y4 ~ Y7), not exceed 3A at common point	Single end: 2A, common point: 4A
Pulse output	2 ways, up to 200KHz respectively		4 ways, up to 200KHz respectively	/
Interface
RS232	1 (MINI232 interface supports upload and download, monitoring, serial communication, with baud rate 1200Bps ~ 115200Bps)
RS485	1 (supports serial communication, with baud rate 4800Bps ~ 115200Bps)
RJ45	No
USB DEVICE INTERFACE	Support upload and download, online monitoring
Other parameters
FCC compatibility	Comply with FCC, Class A
Voltage withstand test	1000V AC, 1 minute
CE certification	In line with EN55032 and EN55035 standards
Protection level	IP30
Structure and environment
Dimensions (WHD)	109.59280(mm)	147.69280(mm)	2169280(mm)	109.59280(mm)	147.69280(mm)	2169280(mm)
Weight (g)	454	563	769	465	590	831
Ambient temperature	0℃～55℃ (No freeze)
Working environment humidity	5～95%RH (No condensation)
Shock resistance	10～25HZ (XYZ direction 2G/30 minutes)
Software
Host computer software	DELIXI-PLC I (Website: , Wechat Official Accounts: Delixi Inverter)

II.Basic PLC expansion module

Model	CDC1-SE16DXR-C	CDC1-SE16DXT-C	CDC1-SE16DI-C	CDC1-SE16DR-C	CDC1-SE16DT-C	CDC1-SE6AX-C	CDC1-SE4PT-C
Input parameters	CDC1-SE16DXR-C	CDC1-SE16DXT-C	CDC1-SE16DI-C	CDC1-SE16DR-C	CDC1-SE16DT-C	CDC1-SE6AX-C	CDC1-SE4PT-C
Digital input	8	8	16	/	/	/	/
Analog input	/	/	/	/	/	4 (12-bit)	/
Thermocouple input	/	/	/	/	/	/	4 (16-bit)
Output parameters
Digital output	8	8	/	16	16	/	/
Output type	Relay	Transistor	/	Relay	Transistor	/	/
Analog output	/	/	/	/	/	2 (16-bit)	/

Products

PLC

400-1888-155